initial commit to this copied repo.

3d-print-model/Magnet Case - with button preferred/info.md

@@ -0,0 +1,9 @@
+I have added new 3D models, which can be supplemented with magnets so that you no longer have to attach the front panel to the case with a rubber band. You can find the procedure and more details in my Twitter Thread ...
+
+Magnets: 5x5mm round nickel plate: https://www.supermagnete.ch/scheibenmagnete-neodym/scheibenmagnet-5mm-5mm_S-05-05-N
+Metal plates: 2x10mm self-adhesive: https://www.supermagnete.ch/magnethaftgruende-selbstklebend/metallscheiben-selbstklebend-10mm_PAS-10
+
+For more information please DM me on Twitter or Telegram! @Nicolas_b58
+
+Update axelhamburch 838776:
+In this version, the front panel has a hole for a 12 mm LED button in the upper area of the front panel. You will need a drill and possibly a file for the "screen backplate". Depending on which display you use, you may also need this for a feed-through for the ribbon cable. 

3d-print-model/Magnet Case/info.md

@@ -0,0 +1,6 @@
+I have added new 3D models, which can be supplemented with magnets so that you no longer have to attach the front panel to the case with a rubber band. You can find the procedure and more details in my Twitter Thread ...
+
+Magnets: 5x5mm round nickel plate: https://www.supermagnete.ch/scheibenmagnete-neodym/scheibenmagnet-5mm-5mm_S-05-05-N
+Metal plates: 2x10mm self-adhesive: https://www.supermagnete.ch/magnethaftgruende-selbstklebend/metallscheiben-selbstklebend-10mm_PAS-10
+
+For more information please DM me on Twitter or Telegram! @Nicolas_b58

3d-print-model/README.md

@@ -0,0 +1,41 @@
+<img src="images/3d_printed_case.jpeg"> <br>
+
+# 3D Printed L-ATM Case PE-Edition
+
+Below files can be used to print a case, which lowers your overall costs. The models can be printed  without any supports.
+
+This is the first version and is designed to be used with inserts to mount the Coin-Acceptor as well as the Rasbperry-Pi Zero. For the Coin Acceptor use **M3** inserts [(Amazon)](https://amzn.to/35eNkgj), for the Raspberry-Pi **M2.5** [(Amazon)](https://amzn.to/2HjF0Uo) inserts are needed.
+The Lids holds by friction fit.
+
+
+For the case **needed** are 3 Parts: 
+- **Shell**
+  
+- **Back Lid**
+  - two versions
+    - normal with 2mm thick plate
+    - thicker with 3mm thick plate
+- **Top Lid**
+  - there are two separate versions:
+    - with Lightning-Logo, *for dual color print add a **color change at Z 3.00 mm***. <img src="images/top_lid_with_logo.jpeg"  width="480">
+    - without any logo
+- Mounting Rim
+  - optional but *recommended* to properly glue the Top Lid onto the Back Lid.
+
+
+1. Print Shell / Back Lid / Top Lid / Mounting Rim
+2. Use soldering iron to:
+   1. Add M3 Inserts into Coin Acceptor holes 
+   2. Add M2.5 Inserts into Raspberry holes
+   
+   <br><img src="images/shell_inserts.jpeg"  width="480"> <br>
+   <img src="images/shell_inserted.jpeg"  width="480">
+   
+3. If you have printed the *Mounting Rim* put it around the BackLid
+<br><img src="images/lids_and_rim.jpeg"  width="480"> <br> <img src="images/rim_and_backlid.jpeg"  width="480">
+4. put glue on the Top Lid and use something to press both together
+<img src="images/mounting_rim.jpeg"  width="480">
+5. this is what it should look like without the rim
+<img src="images/glued_lid.jpeg"  width="480">
+   
+