initial commit to this copied repo.
This commit is contained in:
Jens Noack (z003u7dz)
commit
019f8768cd
71 changed files with 6812 additions and 0 deletions
289
firmware/include/GxEPD2_display_selection_new_style.h
Normal file
289
firmware/include/GxEPD2_display_selection_new_style.h
Normal file
|
|
@ -0,0 +1,289 @@
|
|||
// Display Library example for SPI e-paper panels from Dalian Good Display and boards from Waveshare.
|
||||
// Requires HW SPI and Adafruit_GFX. Caution: the e-paper panels require 3.3V supply AND data lines!
|
||||
//
|
||||
// Display Library based on Demo Example from Good Display: http://www.e-paper-display.com/download_list/downloadcategoryid=34&isMode=false.html
|
||||
//
|
||||
// Author: Jean-Marc Zingg
|
||||
//
|
||||
// Version: see library.properties
|
||||
//
|
||||
// Library: https://github.com/ZinggJM/GxEPD2
|
||||
|
||||
// Supporting Arduino Forum Topics:
|
||||
// Waveshare e-paper displays with SPI: http://forum.arduino.cc/index.php?topic=487007.0
|
||||
// Good Display ePaper for Arduino: https://forum.arduino.cc/index.php?topic=436411.0
|
||||
|
||||
// *** for Waveshare ESP32 Driver board *** //
|
||||
// mapping of Waveshare ESP32 Driver Board
|
||||
// BUSY -> 25, RST -> 26, DC -> 27, CS-> 15, CLK -> 13, DIN -> 14
|
||||
// uncomment next two lines for Waveshare ESP32 Driver Board
|
||||
#define USE_HSPI_FOR_EPD
|
||||
#define ENABLE_GxEPD2_GFX 0
|
||||
// *** end Waveshare ESP32 Driver board *** //
|
||||
|
||||
// NOTE: you may need to adapt or select for your wiring in the processor specific conditional compile sections below
|
||||
// select the display class (only one), matching the kind of display panel
|
||||
#define GxEPD2_DISPLAY_CLASS GxEPD2_BW
|
||||
// #define GxEPD2_DISPLAY_CLASS GxEPD2_3C
|
||||
// #define GxEPD2_DISPLAY_CLASS GxEPD2_4C
|
||||
// #define GxEPD2_DISPLAY_CLASS GxEPD2_7C
|
||||
|
||||
// select the display driver class (only one) for your panel
|
||||
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_150_BN // 1.54 inch Waveshare e-paper display
|
||||
// const String display_type = "GxEPD2_150_BN";
|
||||
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_213_B74 // Waveshare 2.13 inch e-paper display - Version 3
|
||||
// const String display_type = "GxEPD2_213_B74";
|
||||
|
||||
#define GxEPD2_DRIVER_CLASS GxEPD2_213_flex // Waveshare 2.13 inch e-paper display - (D) flex (yellow)
|
||||
const String display_type = "GxEPD2_213_flex";
|
||||
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_270 // Waveshare 264x176, 2.7inch E-Ink display - Version 1
|
||||
// const String display_type = "GxEPD2_270";
|
||||
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_270_GDEY027T91 // Waveshare 264x176, 2.7inch E-Ink display - Version 2
|
||||
// const String display_type = "GxEPD2_270_GDEY027T91";
|
||||
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_154 // GDEP015OC1 200x200, IL3829, (WFC0000CZ07), no longer available
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_154_D67 // GDEH0154D67 200x200, SSD1681, (HINK-E154A07-A1)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_102 // GDEW0102T4 80x128, UC8175, (WFT0102CZA2)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_154_T8 // GDEW0154T8 152x152, UC8151 (IL0373), (WFT0154CZ17)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_154_M09 // GDEW0154M09 200x200, JD79653A, (WFT0154CZB3)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_154_M10 // GDEW0154M10 152x152, UC8151D, (WFT0154CZ17)
|
||||
/// #define GxEPD2_DRIVER_CLASS GxEPD2_154_GDEY0154D67 // GDEY0154D67 200x200, SSD1681, (FPC-B001 20.05.21)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_213 // GDE0213B1 122x250, IL3895, (HINK-E0213-G01), phased out
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_213_B72 // GDEH0213B72 122x250, SSD1675A (IL3897), (HINK-E0213A22-A0 SLH1852)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_213_B73 // GDEH0213B73 122x250, SSD1675B, (HINK-E0213A22-A0 SLH1914)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_213_B74 // GDEM0213B74 122x250, SSD1680, FPC-7528B)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_213_flex // GDEW0213I5F 104x212, UC8151 (IL0373)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_213_M21 // GDEW0213M21 104x212, UC8151 (IL0373), (WFT0213CZ16)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_213_T5D // GDEW0213T5D 104x212, UC8151D, (WFT0213CZ16)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_213_BN // DEPG0213BN 122x250, SSD1680, (FPC-7528B), TTGO T5 V2.4.1, V2.3.1
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_213_GDEY0213B74 // GDEY0213B74 122x250, SSD1680, (FPC-A002 20.04.08)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_260 // GDEW026T0 152x296, UC8151 (IL0373), (WFT0154CZ17)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_260_M01 // GDEW026M01 152x296, UC8151 (IL0373), (WFT0260CZB2)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_266_BN // DEPG0266BN 152x296, SSD1680, (FPC7510), TTGO T5 V2.66, TTGO T5 V2.4.1
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_266_GDEY0266T90 // GDEY0266T90 152x296, SSD1680, (FPC-A003 HB)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_290 // GDEH029A1 128x296, SSD1608 (IL3820), (E029A01-FPC-A1 SYX1553)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_290_T5 // GDEW029T5 128x296, UC8151 (IL0373), (WFT0290CZ10)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_290_T5D // GDEW029T5D 128x296, UC8151D, (WFT0290CZ10)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_290_I6FD // GDEW029I6FD 128x296, UC8151D, (WFT0290CZ10)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_290_T94 // GDEM029T94 128x296, SSD1680, (FPC-7519 rev.b)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_290_T94_V2 // GDEM029T94 128x296, SSD1680, (FPC-7519 rev.b), Waveshare 2.9" V2 variant
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_290_BS // DEPG0290BS 128x296, SSD1680, (FPC-7519 rev.b)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_290_M06 // GDEW029M06 128x296, UC8151D, (WFT0290CZ10)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_290_GDEY029T94 // GDEY029T94 128x296, SSD1680, (FPC-A005 20.06.15)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_371 // GDEW0371W7 240x416, UC8171 (IL0324), (missing)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_370_TC1 // ED037TC1 280x480, SSD1677, (ICA-FU-20 ichia 2029), Waveshare 3.7"
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_420 // GDEW042T2 400x300, UC8176 (IL0398), (WFT042CZ15)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_420_M01 // GDEW042M01 400x300, UC8176 (IL0398), (WFT042CZ15)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_420_GDEY042T91 // GDEY042T91 400x300, SSD1683 (no inking)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_583 // GDEW0583T7 600x448, UC8159c (IL0371), (missing)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_583_T8 // GDEW0583T8 648x480, EK79655 (GD7965), (WFT0583CZ61)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_583_GDEQ0583T31 // GDEQ0583T31 648x480, UC8179, (P583010-MF1-B)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_750 // GDEW075T8 640x384, UC8159c (IL0371), (WF0583CZ09)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_750_T7 // GDEW075T7 800x480, EK79655 (GD7965), (WFT0583CZ61)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_750_YT7 // GDEY075T7 800x480, UC8179 (GD7965), (FPC-C001 20.8.20)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_1160_T91 // GDEH116T91 960x640, SSD1677, (none or hidden)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_1248 // GDEW1248T3 1304x984, UC8179, (WFT1248BZ23,WFT1248BZ24)
|
||||
// 3-color e-papers
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_154c // GDEW0154Z04 200x200, IL0376F, (WFT0000CZ04), no longer available
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_154_Z90c // GDEH0154Z90 200x200, SSD1681, (HINK-E154A07-A1)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_213c // GDEW0213Z16 104x212, UC8151 (IL0373), (WFT0213CZ16)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_213_Z19c // GDEH0213Z19 104x212, UC8151D, (HINK-E0213A20-A2 2020-11-19)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_213_Z98c // GDEY0213Z98 122x250, SSD1680, (FPC-A002 20.04.08)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_266c // GDEY0266Z90 152x296, SSD1680, (FPC-7510)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_270c // GDEW027C44 176x264, IL91874, (WFI0190CZ22)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_290c // GDEW029Z10 128x296, UC8151 (IL0373), (WFT0290CZ10)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_290_Z13c // GDEH029Z13 128x296, UC8151D, (HINK-E029A10-A3 20160809)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_290_C90c // GDEM029C90 128x296, SSD1680, (FPC-7519 rev.b)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_420c // GDEW042Z15 400x300, UC8176 (IL0398), (WFT0420CZ15)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_420c_Z21 // GDEQ042Z21 400x300, UC8276, (hidden)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_583c // GDEW0583Z21 600x448, UC8159c (IL0371), (missing)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_583c_Z83 // GDEW0583Z83 648x480, EK79655 (GD7965), (WFT0583CZ61)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_750c // GDEW075Z09 640x384, UC8159c (IL0371), (WF0583CZ09)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_750c_Z08 // GDEW075Z08 800x480, EK79655 (GD7965), (WFT0583CZ61)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_750c_Z90 // GDEH075Z90 880x528, SSD1677, (HINK-E075A07-A0)
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_1248c // GDEY1248Z51 1304x984, UC8179, (WFT1248BZ23,WFT1248BZ24)
|
||||
// 4-color e-paper
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_437c // Waveshare 4.37" 4-color
|
||||
// 7-color e-paper
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_565c // Waveshare 5.65" 7-color
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_730c_GDEY073D46 // GDEY073D46 800x480 7-color, (N-FPC-001 2021.11.26)
|
||||
// grey levels parallel IF e-papers on Waveshare e-Paper IT8951 Driver HAT
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_it60 // ED060SCT 800x600
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_it60_1448x1072 // ED060KC1 1448x1072
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_it78_1872x1404 // ED078KC2 1872x1404
|
||||
// #define GxEPD2_DRIVER_CLASS GxEPD2_it103_1872x1404 // ES103TC1 1872x1404
|
||||
|
||||
// SS is usually used for CS. define here for easy change
|
||||
#ifndef EPD_CS
|
||||
#define EPD_CS SS
|
||||
#endif
|
||||
|
||||
#if defined(GxEPD2_DISPLAY_CLASS) && defined(GxEPD2_DRIVER_CLASS)
|
||||
|
||||
// somehow there should be an easier way to do this
|
||||
#define GxEPD2_BW_IS_GxEPD2_BW true
|
||||
#define GxEPD2_3C_IS_GxEPD2_3C true
|
||||
#define GxEPD2_4C_IS_GxEPD2_4C true
|
||||
#define GxEPD2_7C_IS_GxEPD2_7C true
|
||||
#define GxEPD2_1248_IS_GxEPD2_1248 true
|
||||
#define GxEPD2_1248c_IS_GxEPD2_1248c true
|
||||
#define IS_GxEPD(c, x) (c##x)
|
||||
#define IS_GxEPD2_BW(x) IS_GxEPD(GxEPD2_BW_IS_, x)
|
||||
#define IS_GxEPD2_3C(x) IS_GxEPD(GxEPD2_3C_IS_, x)
|
||||
#define IS_GxEPD2_4C(x) IS_GxEPD(GxEPD2_4C_IS_, x)
|
||||
#define IS_GxEPD2_7C(x) IS_GxEPD(GxEPD2_7C_IS_, x)
|
||||
#define IS_GxEPD2_1248(x) IS_GxEPD(GxEPD2_1248_IS_, x)
|
||||
#define IS_GxEPD2_1248c(x) IS_GxEPD(GxEPD2_1248c_IS_, x)
|
||||
|
||||
#include "GxEPD2_selection_check.h"
|
||||
|
||||
#if defined(ESP8266)
|
||||
#define MAX_DISPLAY_BUFFER_SIZE (81920ul - 34000ul - 5000ul) // ~34000 base use, change 5000 to your application use
|
||||
#if IS_GxEPD2_BW(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= MAX_DISPLAY_BUFFER_SIZE / (EPD::WIDTH / 8) ? EPD::HEIGHT : MAX_DISPLAY_BUFFER_SIZE / (EPD::WIDTH / 8))
|
||||
#elif IS_GxEPD2_3C(GxEPD2_DISPLAY_CLASS) || IS_GxEPD2_4C(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE / 2) / (EPD::WIDTH / 8) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE / 2) / (EPD::WIDTH / 8))
|
||||
#elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
|
||||
#endif
|
||||
// adapt the constructor parameters to your wiring
|
||||
GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=D8*/ EPD_CS, /*DC=D3*/ 0, /*RST=D4*/ 2, /*BUSY=D2*/ 4));
|
||||
// mapping of Waveshare e-Paper ESP8266 Driver Board, new version
|
||||
// GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=15*/ EPD_CS, /*DC=4*/ 4, /*RST=2*/ 2, /*BUSY=5*/ 5));
|
||||
// mapping of Waveshare e-Paper ESP8266 Driver Board, old version
|
||||
// GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=15*/ EPD_CS, /*DC=4*/ 4, /*RST=5*/ 5, /*BUSY=16*/ 16));
|
||||
#undef MAX_DISPLAY_BUFFER_SIZE
|
||||
#undef MAX_HEIGHT
|
||||
#endif
|
||||
|
||||
#if defined(ESP32)
|
||||
#define MAX_DISPLAY_BUFFER_SIZE 65536ul // e.g.
|
||||
#if IS_GxEPD2_BW(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= MAX_DISPLAY_BUFFER_SIZE / (EPD::WIDTH / 8) ? EPD::HEIGHT : MAX_DISPLAY_BUFFER_SIZE / (EPD::WIDTH / 8))
|
||||
#elif IS_GxEPD2_3C(GxEPD2_DISPLAY_CLASS) || IS_GxEPD2_4C(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE / 2) / (EPD::WIDTH / 8) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE / 2) / (EPD::WIDTH / 8))
|
||||
#elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
|
||||
#endif
|
||||
// adapt the constructor parameters to your wiring
|
||||
#if !IS_GxEPD2_1248(GxEPD2_DRIVER_CLASS) && !IS_GxEPD2_1248c(GxEPD2_DRIVER_CLASS)
|
||||
#if defined(ARDUINO_LOLIN_D32_PRO)
|
||||
GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=5*/ EPD_CS, /*DC=*/0, /*RST=*/2, /*BUSY=*/15)); // my LOLIN_D32_PRO proto board
|
||||
#else
|
||||
// GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=5*/ EPD_CS, /*DC=*/ 17, /*RST=*/ 16, /*BUSY=*/ 4)); // my suggested wiring and proto board
|
||||
// *** uncomment next line for standard ESP32 *** //
|
||||
// GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=5*/ 26, /*DC=*/25, /*RST=*/33, /*BUSY=*/27)); // esp32 NodeMCU following AZ Delivery guide pinout
|
||||
// GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=5*/ 5, /*DC=*/ 17, /*RST=*/ 16, /*BUSY=*/ 4)); // LILYGO_T5_V2.4.1
|
||||
// GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=5*/ EPD_CS, /*DC=*/ 19, /*RST=*/ 4, /*BUSY=*/ 34)); // LILYGO® TTGO T5 2.66
|
||||
// GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=5*/ EPD_CS, /*DC=*/ 2, /*RST=*/ 0, /*BUSY=*/ 4)); // e.g. TTGO T8 ESP32-WROVER
|
||||
// *** uncomment next line for Waveshare ESP32 Driver board *** //
|
||||
GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 15, /*DC=*/ 27, /*RST=*/ 26, /*BUSY=*/ 25)); // Waveshare ESP32 Driver Board
|
||||
#endif
|
||||
#else // GxEPD2_1248 or GxEPD2_1248c
|
||||
// Waveshare 12.48 b/w or b/w/r SPI display board and frame or Good Display 12.48 b/w panel GDEW1248T3 or b/w/r panel GDEY1248Z51
|
||||
// general constructor for use with all parameters, e.g. for Waveshare ESP32 driver board mounted on connection board
|
||||
GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*sck=*/13, /*miso=*/12, /*mosi=*/14,
|
||||
/*cs_m1=*/23, /*cs_s1=*/22, /*cs_m2=*/16, /*cs_s2=*/19,
|
||||
/*dc1=*/25, /*dc2=*/17, /*rst1=*/33, /*rst2=*/5,
|
||||
/*busy_m1=*/32, /*busy_s1=*/26, /*busy_m2=*/18, /*busy_s2=*/4));
|
||||
#endif
|
||||
#undef MAX_DISPLAY_BUFFER_SIZE
|
||||
#undef MAX_HEIGHT
|
||||
#endif
|
||||
|
||||
// can't use package "STMF1 Boards (STM32Duino.com)" (Roger Clark) anymore with Adafruit_GFX, use "STM32 Boards (selected from submenu)" (STMicroelectronics)
|
||||
#if defined(ARDUINO_ARCH_STM32)
|
||||
#define MAX_DISPLAY_BUFFER_SIZE 15000ul // ~15k is a good compromise
|
||||
#if IS_GxEPD2_BW(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= MAX_DISPLAY_BUFFER_SIZE / (EPD::WIDTH / 8) ? EPD::HEIGHT : MAX_DISPLAY_BUFFER_SIZE / (EPD::WIDTH / 8))
|
||||
#elif IS_GxEPD2_3C(GxEPD2_DISPLAY_CLASS) || IS_GxEPD2_4C(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE / 2) / (EPD::WIDTH / 8) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE / 2) / (EPD::WIDTH / 8))
|
||||
#elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
|
||||
#endif
|
||||
// adapt the constructor parameters to your wiring
|
||||
GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=PA4*/ EPD_CS, /*DC=*/PA3, /*RST=*/PA2, /*BUSY=*/PA1));
|
||||
#undef MAX_DISPLAY_BUFFER_SIZE
|
||||
#undef MAX_HEIGHT
|
||||
#endif
|
||||
|
||||
#if defined(__AVR)
|
||||
#if defined(ARDUINO_AVR_MEGA2560) // Note: SS is on 53 on MEGA
|
||||
#define MAX_DISPLAY_BUFFER_SIZE 5000 // e.g. full height for 200x200
|
||||
#else // Note: SS is on 10 on UNO, NANO
|
||||
#define MAX_DISPLAY_BUFFER_SIZE 800 //
|
||||
#endif
|
||||
#if IS_GxEPD2_BW(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= MAX_DISPLAY_BUFFER_SIZE / (EPD::WIDTH / 8) ? EPD::HEIGHT : MAX_DISPLAY_BUFFER_SIZE / (EPD::WIDTH / 8))
|
||||
#elif IS_GxEPD2_3C(GxEPD2_DISPLAY_CLASS) || IS_GxEPD2_4C(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE / 2) / (EPD::WIDTH / 8) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE / 2) / (EPD::WIDTH / 8))
|
||||
#elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
|
||||
#endif
|
||||
// adapt the constructor parameters to your wiring
|
||||
GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/EPD_CS, /*DC=*/8, /*RST=*/9, /*BUSY=*/7));
|
||||
// for Arduino Micro or Arduino Leonardo with CS on 10 on my proto boards (SS would be 17) uncomment instead:
|
||||
// GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 10, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7));
|
||||
#endif
|
||||
|
||||
#if defined(ARDUINO_ARCH_SAM)
|
||||
#define MAX_DISPLAY_BUFFER_SIZE 32768ul // e.g., up to 96k
|
||||
#if IS_GxEPD2_BW(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= MAX_DISPLAY_BUFFER_SIZE / (EPD::WIDTH / 8) ? EPD::HEIGHT : MAX_DISPLAY_BUFFER_SIZE / (EPD::WIDTH / 8))
|
||||
#elif IS_GxEPD2_3C(GxEPD2_DISPLAY_CLASS) || IS_GxEPD2_4C(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE / 2) / (EPD::WIDTH / 8) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE / 2) / (EPD::WIDTH / 8))
|
||||
#elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
|
||||
#endif
|
||||
// adapt the constructor parameters to your wiring
|
||||
GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=10*/ EPD_CS, /*DC=*/8, /*RST=*/9, /*BUSY=*/7));
|
||||
#undef MAX_DISPLAY_BUFFER_SIZE
|
||||
#undef MAX_HEIGHT
|
||||
#endif
|
||||
|
||||
#if defined(ARDUINO_ARCH_SAMD)
|
||||
#define MAX_DISPLAY_BUFFER_SIZE 15000ul // ~15k is a good compromise
|
||||
#if IS_GxEPD2_BW(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= MAX_DISPLAY_BUFFER_SIZE / (EPD::WIDTH / 8) ? EPD::HEIGHT : MAX_DISPLAY_BUFFER_SIZE / (EPD::WIDTH / 8))
|
||||
#elif IS_GxEPD2_3C(GxEPD2_DISPLAY_CLASS) || IS_GxEPD2_4C(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE / 2) / (EPD::WIDTH / 8) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE / 2) / (EPD::WIDTH / 8))
|
||||
#elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
|
||||
#endif
|
||||
// adapt the constructor parameters to your wiring
|
||||
GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=4*/ 4, /*DC=*/7, /*RST=*/6, /*BUSY=*/5));
|
||||
// GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=4*/ 4, /*DC=*/ 3, /*RST=*/ 2, /*BUSY=*/ 1)); // my Seed XIOA0
|
||||
// GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=4*/ 3, /*DC=*/ 2, /*RST=*/ 1, /*BUSY=*/ 0)); // my other Seed XIOA0
|
||||
#undef MAX_DISPLAY_BUFFER_SIZE
|
||||
#undef MAX_HEIGHT
|
||||
#endif
|
||||
|
||||
#if defined(ARDUINO_ARCH_RP2040)
|
||||
#define MAX_DISPLAY_BUFFER_SIZE 131072ul // e.g. half of available ram
|
||||
#if IS_GxEPD2_BW(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= MAX_DISPLAY_BUFFER_SIZE / (EPD::WIDTH / 8) ? EPD::HEIGHT : MAX_DISPLAY_BUFFER_SIZE / (EPD::WIDTH / 8))
|
||||
#elif IS_GxEPD2_3C(GxEPD2_DISPLAY_CLASS) || IS_GxEPD2_4C(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE / 2) / (EPD::WIDTH / 8) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE / 2) / (EPD::WIDTH / 8))
|
||||
#elif IS_GxEPD2_7C(GxEPD2_DISPLAY_CLASS)
|
||||
#define MAX_HEIGHT(EPD) (EPD::HEIGHT <= (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2) ? EPD::HEIGHT : (MAX_DISPLAY_BUFFER_SIZE) / (EPD::WIDTH / 2))
|
||||
#endif
|
||||
#if defined(ARDUINO_NANO_RP2040_CONNECT)
|
||||
// adapt the constructor parameters to your wiring
|
||||
GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/EPD_CS, /*DC=*/8, /*RST=*/9, /*BUSY=*/7));
|
||||
#endif
|
||||
#if defined(ARDUINO_RASPBERRY_PI_PICO)
|
||||
// adapt the constructor parameters to your wiring
|
||||
// GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ EPD_CS, /*DC=*/ 8, /*RST=*/ 9, /*BUSY=*/ 7)); // my proto board
|
||||
// mapping of GoodDisplay DESPI-PICO. NOTE: uses alternate HW SPI pins!
|
||||
GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/3, /*DC=*/2, /*RST=*/1, /*BUSY=*/0)); // DESPI-PICO
|
||||
// GxEPD2_DISPLAY_CLASS<GxEPD2_DRIVER_CLASS, MAX_HEIGHT(GxEPD2_DRIVER_CLASS)> display(GxEPD2_DRIVER_CLASS(/*CS=*/ 3, /*DC=*/ 2, /*RST=*/ 11, /*BUSY=*/ 10)); // DESPI-PICO modified
|
||||
#endif
|
||||
#undef MAX_DISPLAY_BUFFER_SIZE
|
||||
#undef MAX_HEIGHT
|
||||
#endif
|
||||
|
||||
#endif
|
||||
106
firmware/include/GxEPD2_selection_check.h
Normal file
106
firmware/include/GxEPD2_selection_check.h
Normal file
|
|
@ -0,0 +1,106 @@
|
|||
// Display Library example for SPI e-paper panels from Dalian Good Display and boards from Waveshare.
|
||||
// Requires HW SPI and Adafruit_GFX. Caution: the e-paper panels require 3.3V supply AND data lines!
|
||||
//
|
||||
// Display Library based on Demo Example from Good Display: http://www.e-paper-display.com/download_list/downloadcategoryid=34&isMode=false.html
|
||||
//
|
||||
// Author: Jean-Marc Zingg
|
||||
//
|
||||
// Version: see library.properties
|
||||
//
|
||||
// Library: https://github.com/ZinggJM/GxEPD2
|
||||
|
||||
// Supporting Arduino Forum Topics:
|
||||
// Waveshare e-paper displays with SPI: http://forum.arduino.cc/index.php?topic=487007.0
|
||||
// Good Display ePaper for Arduino: https://forum.arduino.cc/index.php?topic=436411.0
|
||||
|
||||
#define GxEPD2_102_IS_BW true
|
||||
#define GxEPD2_150_BN_IS_BW true
|
||||
#define GxEPD2_154_IS_BW true
|
||||
#define GxEPD2_154_D67_IS_BW true
|
||||
#define GxEPD2_154_T8_IS_BW true
|
||||
#define GxEPD2_154_M09_IS_BW true
|
||||
#define GxEPD2_154_M10_IS_BW true
|
||||
#define GxEPD2_154_GDEY0154D67_IS_BW true
|
||||
#define GxEPD2_213_IS_BW true
|
||||
#define GxEPD2_213_B72_IS_BW true
|
||||
#define GxEPD2_213_B73_IS_BW true
|
||||
#define GxEPD2_213_B74_IS_BW true
|
||||
#define GxEPD2_213_flex_IS_BW true
|
||||
#define GxEPD2_213_M21_IS_BW true
|
||||
#define GxEPD2_213_T5D_IS_BW true
|
||||
#define GxEPD2_213_BN_IS_BW true
|
||||
#define GxEPD2_213_GDEY0213B74_IS_BW true
|
||||
#define GxEPD2_260_IS_BW true
|
||||
#define GxEPD2_260_M01_IS_BW true
|
||||
#define GxEPD2_266_BN_IS_BW true
|
||||
#define GxEPD2_266_GDEY0266T90_IS_BW true
|
||||
#define GxEPD2_270_IS_BW true
|
||||
#define GxEPD2_270_GDEY027T91_IS_BW true
|
||||
#define GxEPD2_290_IS_BW true
|
||||
#define GxEPD2_290_T5_IS_BW true
|
||||
#define GxEPD2_290_T5D_IS_BW true
|
||||
#define GxEPD2_290_I6FD_IS_BW true
|
||||
#define GxEPD2_290_T94_IS_BW true
|
||||
#define GxEPD2_290_T94_V2_IS_BW true
|
||||
#define GxEPD2_290_BS_IS_BW true
|
||||
#define GxEPD2_290_M06_IS_BW true
|
||||
#define GxEPD2_290_GDEY029T94_IS_BW true
|
||||
#define GxEPD2_371_IS_BW true
|
||||
#define GxEPD2_370_TC1_IS_BW true
|
||||
#define GxEPD2_420_IS_BW true
|
||||
#define GxEPD2_420_M01_IS_BW true
|
||||
#define GxEPD2_420_GDEY042T91_IS_BW true
|
||||
#define GxEPD2_583_IS_BW true
|
||||
#define GxEPD2_583_T8_IS_BW true
|
||||
#define GxEPD2_583_GDEQ0583T31_IS_BW true
|
||||
#define GxEPD2_750_IS_BW true
|
||||
#define GxEPD2_750_T7_IS_BW true
|
||||
#define GxEPD2_750_YT7_IS_BW true
|
||||
#define GxEPD2_1160_T91_IS_BW true
|
||||
#define GxEPD2_1248_IS_BW true
|
||||
#define GxEPD2_it60_IS_BW true
|
||||
#define GxEPD2_it60_1448x1072_IS_BW true
|
||||
#define GxEPD2_it78_1872x1404_IS_BW true
|
||||
#define GxEPD2_it103_1872x1404_IS_BW true
|
||||
// 3-color e-papers
|
||||
#define GxEPD2_154c_IS_3C true
|
||||
#define GxEPD2_154_Z90c_IS_3C true
|
||||
#define GxEPD2_213c_IS_3C true
|
||||
#define GxEPD2_213_Z19c_IS_3C true
|
||||
#define GxEPD2_213_Z98c_IS_3C true
|
||||
#define GxEPD2_266c_IS_3C true
|
||||
#define GxEPD2_270c_IS_3C true
|
||||
#define GxEPD2_290c_IS_3C true
|
||||
#define GxEPD2_290_Z13c_IS_3C true
|
||||
#define GxEPD2_290_C90c_IS_3C true
|
||||
#define GxEPD2_420c_IS_3C true
|
||||
#define GxEPD2_420c_Z21_IS_3C true
|
||||
#define GxEPD2_583c_IS_3C true
|
||||
#define GxEPD2_583c_Z83_IS_3C true
|
||||
#define GxEPD2_750c_IS_3C true
|
||||
#define GxEPD2_750c_Z08_IS_3C true
|
||||
#define GxEPD2_750c_Z90_IS_3C true
|
||||
#define GxEPD2_1248c_IS_3C true
|
||||
// 4-color e-paper
|
||||
#define GxEPD2_437c_IS_4C true
|
||||
// 7-color e-paper
|
||||
#define GxEPD2_565c_IS_7C true
|
||||
#define GxEPD2_730c_GDEY073D46_IS_7C true
|
||||
|
||||
#if defined(GxEPD2_DISPLAY_CLASS) && defined(GxEPD2_DRIVER_CLASS)
|
||||
#define IS_GxEPD2_DRIVER(c, x) (c##x)
|
||||
#define IS_GxEPD2_DRIVER_BW(x) IS_GxEPD2_DRIVER(x, _IS_BW)
|
||||
#define IS_GxEPD2_DRIVER_3C(x) IS_GxEPD2_DRIVER(x, _IS_3C)
|
||||
#define IS_GxEPD2_DRIVER_4C(x) IS_GxEPD2_DRIVER(x, _IS_4C)
|
||||
#define IS_GxEPD2_DRIVER_7C(x) IS_GxEPD2_DRIVER(x, _IS_7C)
|
||||
#if IS_GxEPD2_BW(GxEPD2_DISPLAY_CLASS) && IS_GxEPD2_DRIVER_3C(GxEPD2_DRIVER_CLASS)
|
||||
#error "GxEPD2_BW used with 3-color driver class"
|
||||
#endif
|
||||
#if IS_GxEPD2_3C(GxEPD2_DISPLAY_CLASS) && IS_GxEPD2_DRIVER_BW(GxEPD2_DRIVER_CLASS)
|
||||
#error "GxEPD2_3C used with b/w driver class"
|
||||
#endif
|
||||
#if !IS_GxEPD2_DRIVER_BW(GxEPD2_DRIVER_CLASS) && !IS_GxEPD2_DRIVER_3C(GxEPD2_DRIVER_CLASS) && !IS_GxEPD2_DRIVER_4C(GxEPD2_DRIVER_CLASS) && !IS_GxEPD2_DRIVER_7C(GxEPD2_DRIVER_CLASS)
|
||||
#error "neither BW nor 3C nor 4C nor 7C kind defined for driver class (error in GxEPD2_selection_check.h)"
|
||||
#endif
|
||||
|
||||
#endif
|
||||
83
firmware/include/GxEPD2_wiring_examples.h
Normal file
83
firmware/include/GxEPD2_wiring_examples.h
Normal file
|
|
@ -0,0 +1,83 @@
|
|||
// Display Library example for SPI e-paper panels from Dalian Good Display and boards from Waveshare.
|
||||
// Requires HW SPI and Adafruit_GFX. Caution: the e-paper panels require 3.3V supply AND data lines!
|
||||
//
|
||||
// Display Library based on Demo Example from Good Display: http://www.e-paper-display.com/download_list/downloadcategoryid=34&isMode=false.html
|
||||
//
|
||||
// Author: Jean-Marc Zingg
|
||||
//
|
||||
// Version: see library.properties
|
||||
//
|
||||
// Library: https://github.com/ZinggJM/GxEPD2
|
||||
|
||||
// Supporting Arduino Forum Topics:
|
||||
// Waveshare e-paper displays with SPI: http://forum.arduino.cc/index.php?topic=487007.0
|
||||
// Good Display ePaper for Arduino: https://forum.arduino.cc/index.php?topic=436411.0
|
||||
|
||||
// mapping suggestion from Waveshare SPI e-Paper to Wemos D1 mini
|
||||
// BUSY -> D2, RST -> D4, DC -> D3, CS -> D8, CLK -> D5, DIN -> D7, GND -> GND, 3.3V -> 3.3V
|
||||
// NOTE: connect 3.3k pull-down from D8 to GND if your board or shield has level converters
|
||||
// NOTE for ESP8266: using SS (GPIO15) for CS may cause boot mode problems, use different pin in case, or 4k7 pull-down
|
||||
// NOTE: connect 1k pull-up from D4 (RST) to 3.3V if your board or shield has the "clever" reset circuit, or use a different pin
|
||||
|
||||
// mapping suggestion from Waveshare SPI e-Paper to generic ESP8266
|
||||
// BUSY -> GPIO4, RST -> GPIO2, DC -> GPIO0, CS -> GPIO15, CLK -> GPIO14, DIN -> GPIO13, GND -> GND, 3.3V -> 3.3V
|
||||
// NOTE: connect 3.3k pull-down from GPIO15 to GND if your board or shield has level converters
|
||||
// NOTE for ESP8266: using SS (GPIO15) for CS may cause boot mode problems, use different pin in case, or 3.3k pull-down
|
||||
// NOTE: connect 1k pull-up from GPIO2 (RST) to 3.3V if your board or shield has the "clever" reset circuit, or use a different pin
|
||||
|
||||
// mapping of Waveshare e-Paper ESP8266 Driver Board, new version
|
||||
// BUSY -> GPIO5, RST -> GPIO2, DC -> GPIO4, CS -> GPIO15, CLK -> GPIO14, DIN -> GPIO13, GND -> GND, 3.3V -> 3.3V
|
||||
// NOTE for ESP8266: using SS (GPIO15) for CS may cause boot mode problems, add a 3.3k pull-down in case
|
||||
// the e-Paper ESP8266 Driver Board should have no boot mode issue, as it doesn't use level converters
|
||||
|
||||
// mapping of Waveshare e-Paper ESP8266 Driver Board, old version
|
||||
// BUSY -> GPIO16, RST -> GPIO5, DC -> GPIO4, CS -> GPIO15, CLK -> GPIO14, DIN -> GPIO13, GND -> GND, 3.3V -> 3.3V
|
||||
// NOTE for ESP8266: using SS (GPIO15) for CS may cause boot mode problems, add a 3.3k pull-down in case
|
||||
// the e-Paper ESP8266 Driver Board should have no boot mode issue, as it doesn't use level converters
|
||||
|
||||
// mapping suggestion for ESP32, e.g. LOLIN32, see .../variants/.../pins_arduino.h for your board
|
||||
// NOTE: there are variants with different pins for SPI ! CHECK SPI PINS OF YOUR BOARD
|
||||
// BUSY -> 4, RST -> 16, DC -> 17, CS -> SS(5), CLK -> SCK(18), DIN -> MOSI(23), GND -> GND, 3.3V -> 3.3V
|
||||
|
||||
// mapping of Waveshare ESP32 Driver Board
|
||||
// BUSY -> 25, RST -> 26, DC -> 27, CS-> 15, CLK -> 13, DIN -> 14
|
||||
// NOTE: this board uses "unusual" SPI pins and requires re-mapping of HW SPI to these pins in SPIClass
|
||||
// see example GxEPD2_WS_ESP32_Driver.ino, it shows how this can be done easily
|
||||
|
||||
// mapping suggestion for ESP32, e.g. LOLIN32 D32 PRO
|
||||
// BUSY -> 15, RST -> 2, DC -> 0, CS -> 5, CLK -> SCK(18), DIN -> MOSI(23), GND -> GND, 3.3V -> 3.3V
|
||||
// note: use explicit value for CS, as SS is re-defined to TF_CS(4) in pins_arduino.h for Board: "LOLIN D32 PRO"
|
||||
|
||||
// mapping suggestion for ESP32, e.g. TTGO T8 ESP32-WROVER
|
||||
// BUSY -> 4, RST -> 0, DC -> 2, CS -> SS(5), CLK -> SCK(18), DIN -> MOSI(23), GND -> GND, 3.3V -> 3.3V
|
||||
// for use with Board: "ESP32 Dev Module":
|
||||
|
||||
// new mapping suggestion for STM32F1, e.g. STM32F103C8T6 "BluePill"
|
||||
// BUSY -> A1, RST -> A2, DC -> A3, CS-> A4, CLK -> A5, DIN -> A7
|
||||
|
||||
// mapping suggestion for AVR, UNO, NANO etc.
|
||||
// BUSY -> 7, RST -> 9, DC -> 8, CS-> 10, CLK -> 13, DIN -> 11
|
||||
|
||||
// mapping suggestion for AVR, Arduino Micro, Leonardo
|
||||
// note: on Leonardo board HW SPI pins are on 6-pin ICSP header
|
||||
// BUSY -> 7, RST -> 9, DC -> 8, CS-> 10, CLK -> 15, DIN -> 16
|
||||
|
||||
// mapping of Waveshare Universal e-Paper Raw Panel Driver Shield for Arduino / NUCLEO
|
||||
// BUSY -> 7, RST -> 8, DC -> 9, CS-> 10, CLK -> 13, DIN -> 11
|
||||
|
||||
// mapping suggestion for Arduino MEGA
|
||||
// BUSY -> 7, RST -> 9, DC -> 8, CS-> 53, CLK -> 52, DIN -> 51
|
||||
|
||||
// mapping suggestion for Arduino DUE, note: pin 77 is on board pin 10, SS is 10
|
||||
// BUSY -> 7, RST -> 9, DC -> 8, CS-> 10, CLK -> 76, DIN -> 75
|
||||
// SPI pins are on 6 pin 2x3 SPI header, no SS on SPI header!
|
||||
|
||||
// mapping suggestion for Arduino MKR1000 or MKRZERO
|
||||
// note: can't use SS on MKR1000: is defined as 24, should be 4
|
||||
// BUSY -> 5, RST -> 6, DC -> 7, CS-> 4, CLK -> 9, DIN -> 8
|
||||
|
||||
// mapping suggestion for Arduino Nano RP2040 Connect
|
||||
// BUSY -> 7, RST -> 9, DC -> 8, CS-> 10, CLK -> 13, DIN -> 11
|
||||
|
||||
// mapping suggestion for Raspberry Pi Pico RP2040
|
||||
// BUSY -> 7, RST -> 9, DC -> 8, CS-> 5, CLK -> 2, DIN -> 3
|
||||
39
firmware/include/README
Normal file
39
firmware/include/README
Normal file
|
|
@ -0,0 +1,39 @@
|
|||
|
||||
This directory is intended for project header files.
|
||||
|
||||
A header file is a file containing C declarations and macro definitions
|
||||
to be shared between several project source files. You request the use of a
|
||||
header file in your project source file (C, C++, etc) located in `src` folder
|
||||
by including it, with the C preprocessing directive `#include'.
|
||||
|
||||
```src/main.c
|
||||
|
||||
#include "header.h"
|
||||
|
||||
int main (void)
|
||||
{
|
||||
...
|
||||
}
|
||||
```
|
||||
|
||||
Including a header file produces the same results as copying the header file
|
||||
into each source file that needs it. Such copying would be time-consuming
|
||||
and error-prone. With a header file, the related declarations appear
|
||||
in only one place. If they need to be changed, they can be changed in one
|
||||
place, and programs that include the header file will automatically use the
|
||||
new version when next recompiled. The header file eliminates the labor of
|
||||
finding and changing all the copies as well as the risk that a failure to
|
||||
find one copy will result in inconsistencies within a program.
|
||||
|
||||
In C, the usual convention is to give header files names that end with `.h'.
|
||||
It is most portable to use only letters, digits, dashes, and underscores in
|
||||
header file names, and at most one dot.
|
||||
|
||||
Read more about using header files in official GCC documentation:
|
||||
|
||||
* Include Syntax
|
||||
* Include Operation
|
||||
* Once-Only Headers
|
||||
* Computed Includes
|
||||
|
||||
https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html
|
||||
135
firmware/include/lightning_atm.h
Normal file
135
firmware/include/lightning_atm.h
Normal file
|
|
@ -0,0 +1,135 @@
|
|||
#ifndef LIGHTNING_ATM_H
|
||||
#define LIGHTNING_ATM_H
|
||||
|
||||
#include <Arduino.h>
|
||||
#include <GxEPD2_BW.h>
|
||||
#include <Fonts/FreeMonoBold9pt7b.h>
|
||||
#include "qrcode.h"
|
||||
#include "Bitcoin.h"
|
||||
#include <stdlib.h>
|
||||
#include <Hash.h>
|
||||
#include <ctype.h>
|
||||
|
||||
// ########################################
|
||||
// ########### USER ACTION ###########
|
||||
// ########################################
|
||||
// Generate and copy in LNbits with the LNURLDevice extension the string for the ATM and paste it here:
|
||||
const String lnurlDeviceString = "https://legend.lnbits.com/lnurldevice/api/v1/lnurl/idexample,keyexample,EUR";
|
||||
// #################### EXAMPLE: https://legend.lnbits.com/lnurldevice/api/v1/lnurl/idexample,keyexample,EUR
|
||||
// ########################################
|
||||
// ########################################
|
||||
// ########################################
|
||||
|
||||
// select the display class and display driver class in the following file (new style):
|
||||
// 1.54 inch Waveshare e-paper display is "GxEPD2_DRIVER_CLASS GxEPD2_150_BN"
|
||||
// Waveshare 264x176, 2.7inch E-Ink display - Version 1 = "GxEPD2_DRIVER_CLASS GxEPD2_270"
|
||||
// Waveshare 264x176, 2.7inch E-Ink display - Version 2 = "GxEPD2_DRIVER_CLASS GxEPD2_270_GDEY027T91"
|
||||
// Waveshare 2.13 inch e-paper display version 3 is "GxEPD2_DRIVER_CLASS GxEPD2_213_B74"
|
||||
// Waveshare 2.13 inch e-paper display (D) flex (yellow) is "GxEPD2_DRIVER_CLASS GxEPD2_213_flex"
|
||||
// use search to find the correct line, and uncomment the other display drivers in this header file:
|
||||
#include "GxEPD2_display_selection_new_style.h"
|
||||
|
||||
// OTHER OPTIONS:
|
||||
|
||||
// Activate for debugging over Serial (1), deactivate in production use (0)
|
||||
#define DEBUG_MODE 0
|
||||
|
||||
#define COIN_PIN 17
|
||||
#define PULSE_TIMEOUT 200
|
||||
#define LED_BUTTON_PIN 21 // old: 13 | new: 21
|
||||
#define BUTTON_PIN 32
|
||||
#define MOSFET_PIN 16 // old: 12 | new: 16
|
||||
#define QR_VERSION 6 // 20 is standard. 6 for simpler QR code, but does not always work.
|
||||
|
||||
typedef struct s_qrdata
|
||||
{
|
||||
uint8_t current_y;
|
||||
uint8_t current_x;
|
||||
uint8_t start_x;
|
||||
uint8_t start_y;
|
||||
uint8_t module_size;
|
||||
uint8_t qr_size;
|
||||
} t_qrdata;
|
||||
|
||||
extern String baseURLATM;
|
||||
extern String secretATM;
|
||||
extern String currencyATM;
|
||||
|
||||
// Bitcoin Logo
|
||||
const unsigned char bitcoin_logo[] PROGMEM = {
|
||||
// 'bitcoin64, 64x64px
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x3f, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xff, 0xff, 0x80, 0x00, 0x00,
|
||||
0x00, 0x00, 0x0f, 0xff, 0xff, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x3f, 0xff, 0xff, 0xfc, 0x00, 0x00,
|
||||
0x00, 0x00, 0x7f, 0xff, 0xff, 0xfe, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00,
|
||||
0x00, 0x03, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x00, 0x07, 0xff, 0xff, 0xff, 0xff, 0xe0, 0x00,
|
||||
0x00, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x00, 0x00, 0x0f, 0xff, 0xfc, 0x7f, 0xff, 0xf0, 0x00,
|
||||
0x00, 0x1f, 0xff, 0xfc, 0x63, 0xff, 0xf8, 0x00, 0x00, 0x3f, 0xff, 0xfc, 0x63, 0xff, 0xfc, 0x00,
|
||||
0x00, 0x7f, 0xfe, 0x38, 0xe3, 0xff, 0xfe, 0x00, 0x00, 0x7f, 0xfe, 0x00, 0xe3, 0xff, 0xfe, 0x00,
|
||||
0x00, 0xff, 0xfe, 0x00, 0x03, 0xff, 0xff, 0x00, 0x00, 0xff, 0xff, 0x80, 0x03, 0xff, 0xff, 0x00,
|
||||
0x00, 0xff, 0xff, 0xc0, 0x00, 0xff, 0xff, 0x80, 0x01, 0xff, 0xff, 0xc0, 0x00, 0x7f, 0xff, 0x80,
|
||||
0x01, 0xff, 0xff, 0xc1, 0xe0, 0x3f, 0xff, 0x80, 0x01, 0xff, 0xff, 0x81, 0xf8, 0x1f, 0xff, 0x80,
|
||||
0x03, 0xff, 0xff, 0x83, 0xf8, 0x1f, 0xff, 0xc0, 0x03, 0xff, 0xff, 0x83, 0xf8, 0x1f, 0xff, 0xc0,
|
||||
0x03, 0xff, 0xff, 0x83, 0xf8, 0x1f, 0xff, 0xc0, 0x03, 0xff, 0xff, 0x01, 0xf0, 0x1f, 0xff, 0xc0,
|
||||
0x03, 0xff, 0xff, 0x00, 0x00, 0x3f, 0xff, 0xc0, 0x03, 0xff, 0xff, 0x00, 0x00, 0x7f, 0xff, 0xc0,
|
||||
0x03, 0xff, 0xff, 0x06, 0x00, 0xff, 0xff, 0xc0, 0x03, 0xff, 0xfe, 0x07, 0xc0, 0x7f, 0xff, 0xc0,
|
||||
0x03, 0xff, 0xfe, 0x0f, 0xe0, 0x3f, 0xff, 0xc0, 0x03, 0xff, 0xfe, 0x0f, 0xf0, 0x3f, 0xff, 0xc0,
|
||||
0x03, 0xff, 0xec, 0x0f, 0xf0, 0x3f, 0xff, 0xc0, 0x03, 0xff, 0xe0, 0x0f, 0xf0, 0x3f, 0xff, 0xc0,
|
||||
0x01, 0xff, 0xc0, 0x0f, 0xf0, 0x3f, 0xff, 0x80, 0x01, 0xff, 0xc0, 0x00, 0x00, 0x3f, 0xff, 0x80,
|
||||
0x01, 0xff, 0xf8, 0x00, 0x00, 0x7f, 0xff, 0x80, 0x01, 0xff, 0xfe, 0x00, 0x00, 0x7f, 0xff, 0x00,
|
||||
0x00, 0xff, 0xfe, 0x30, 0x00, 0xff, 0xff, 0x00, 0x00, 0xff, 0xfe, 0x38, 0xc7, 0xff, 0xff, 0x00,
|
||||
0x00, 0x7f, 0xfe, 0x31, 0xff, 0xff, 0xfe, 0x00, 0x00, 0x7f, 0xfc, 0x31, 0xff, 0xff, 0xfe, 0x00,
|
||||
0x00, 0x3f, 0xff, 0xf1, 0xff, 0xff, 0xfc, 0x00, 0x00, 0x1f, 0xff, 0xf1, 0xff, 0xff, 0xf8, 0x00,
|
||||
0x00, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xf0, 0x00,
|
||||
0x00, 0x07, 0xff, 0xff, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x03, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00,
|
||||
0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xff, 0xff, 0xfe, 0x00, 0x00,
|
||||
0x00, 0x00, 0x3f, 0xff, 0xff, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xf0, 0x00, 0x00,
|
||||
0x00, 0x00, 0x01, 0xff, 0xff, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0xfc, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
|
||||
|
||||
// put function declarations here:
|
||||
void clean_screen();
|
||||
void initialize_display();
|
||||
void to_upper(char* arr);
|
||||
void qr_withdrawl_screen(const char* qr_content);
|
||||
char* makeLNURL(float total);
|
||||
int xor_encrypt(uint8_t* output, size_t outlen, uint8_t* key, size_t keylen, uint8_t* nonce, size_t nonce_len, uint64_t pin, uint64_t amount_in_cents);
|
||||
void show_inserted_amount(int amount_in_cents);
|
||||
String get_amount_string(int amount_in_cents);
|
||||
unsigned int detect_coin();
|
||||
void home_screen();
|
||||
void IRAM_ATTR button_pressed_itr();
|
||||
void wait_for_user_to_scan();
|
||||
String getValue(String data, char separator, int index);
|
||||
void display_sleep();
|
||||
void test_macro();
|
||||
|
||||
// Waveshare 1.54 inch e-ink display functions
|
||||
void home_screen_waveshare_1_54();
|
||||
void show_inserted_amount_waveshare_1_54(String amount_in_euro);
|
||||
void qr_withdrawl_screen_waveshare_1_54(const char* qr_content);
|
||||
void clean_screen_waveshare_1_54();
|
||||
|
||||
// Waveshare 2.7 inch e-ink display functions
|
||||
void home_screen_waveshare_2_7();
|
||||
void show_inserted_amount_waveshare_2_7(String amount_in_euro);
|
||||
void qr_withdrawl_screen_waveshare_2_7(const char* qr_content);
|
||||
void clean_screen_waveshare_2_7();
|
||||
|
||||
// Waveshare 2.13 inch e-ink display (250x122) functions
|
||||
void home_screen_waveshare_2_13();
|
||||
void show_inserted_amount_waveshare_2_13(String amount_in_euro);
|
||||
void qr_withdrawl_screen_waveshare_2_13(const char* qr_content);
|
||||
void clean_screen_waveshare_2_13();
|
||||
|
||||
// Waveshare 2.13 inch e-ink display (D) flex (yellow) (212x104) functions
|
||||
void home_screen_waveshare_2_13_flex();
|
||||
void show_inserted_amount_waveshare_2_13_flex(String amount_in_euro);
|
||||
void qr_withdrawl_screen_waveshare_2_13_flex(const char* qr_content);
|
||||
void clean_screen_waveshare_2_13_flex();
|
||||
|
||||
#endif
|
||||
Loading…
Add table
Add a link
Reference in a new issue