42 lines
1.7 KiB
Markdown
42 lines
1.7 KiB
Markdown
|
<img src="images/3d_printed_case.jpeg"> <br>
|
||
|
|
|
||
|
|
# 3D Printed L-ATM Case PE-Edition
|
||
|
|
|
||
|
|
Below files can be used to print a case, which lowers your overall costs. The models can be printed without any supports.
|
||
|
|
|
||
|
|
This is the first version and is designed to be used with inserts to mount the Coin-Acceptor as well as the Rasbperry-Pi Zero. For the Coin Acceptor use **M3** inserts [(Amazon)](https://amzn.to/35eNkgj), for the Raspberry-Pi **M2.5** [(Amazon)](https://amzn.to/2HjF0Uo) inserts are needed.
|
||
|
|
The Lids holds by friction fit.
|
||
|
|
|
||
|
|
|
||
|
|
For the case **needed** are 3 Parts:
|
||
|
|
- **Shell**
|
||
|
|
|
||
|
|
- **Back Lid**
|
||
|
|
- two versions
|
||
|
|
- normal with 2mm thick plate
|
||
|
|
- thicker with 3mm thick plate
|
||
|
|
- **Top Lid**
|
||
|
|
- there are two separate versions:
|
||
|
|
- with Lightning-Logo, *for dual color print add a **color change at Z 3.00 mm***. <img src="images/top_lid_with_logo.jpeg" width="480">
|
||
|
|
- without any logo
|
||
|
|
- Mounting Rim
|
||
|
|
- optional but *recommended* to properly glue the Top Lid onto the Back Lid.
|
||
|
|
|
||
|
|
|
||
|
|
1. Print Shell / Back Lid / Top Lid / Mounting Rim
|
||
|
|
2. Use soldering iron to:
|
||
|
|
1. Add M3 Inserts into Coin Acceptor holes
|
||
|
|
2. Add M2.5 Inserts into Raspberry holes
|
||
|
|
|
||
|
|
<br><img src="images/shell_inserts.jpeg" width="480"> <br>
|
||
|
|
<img src="images/shell_inserted.jpeg" width="480">
|
||
|
|
|
||
|
|
3. If you have printed the *Mounting Rim* put it around the BackLid
|
||
|
|
<br><img src="images/lids_and_rim.jpeg" width="480"> <br> <img src="images/rim_and_backlid.jpeg" width="480">
|
||
|
|
4. put glue on the Top Lid and use something to press both together
|
||
|
|
<img src="images/mounting_rim.jpeg" width="480">
|
||
|
|
5. this is what it should look like without the rim
|
||
|
|
<img src="images/glued_lid.jpeg" width="480">
|
||
|
|
|
||
|
|
|