1.7 KiB
1.7 KiB
3D Printed L-ATM Case PE-Edition
Below files can be used to print a case, which lowers your overall costs. The models can be printed without any supports.
This is the first version and is designed to be used with inserts to mount the Coin-Acceptor as well as the Rasbperry-Pi Zero. For the Coin Acceptor use M3 inserts (Amazon), for the Raspberry-Pi M2.5 (Amazon) inserts are needed. The Lids holds by friction fit.
For the case needed are 3 Parts:
-
Shell
-
Back Lid
- two versions
- normal with 2mm thick plate
- thicker with 3mm thick plate
- two versions
-
Top Lid
- there are two separate versions:
- with Lightning-Logo, for dual color print add a color change at Z 3.00 mm.
- without any logo
- with Lightning-Logo, for dual color print add a color change at Z 3.00 mm.
- there are two separate versions:
-
Mounting Rim
- optional but recommended to properly glue the Top Lid onto the Back Lid.
-
Print Shell / Back Lid / Top Lid / Mounting Rim
-
Use soldering iron to:
- Add M3 Inserts into Coin Acceptor holes
- Add M2.5 Inserts into Raspberry holes
-
If you have printed the Mounting Rim put it around the BackLid
-
put glue on the Top Lid and use something to press both together
-
this is what it should look like without the rim
